Small Reduction Stepper Motor – 5VDC 32-Step 1 16 Gearing

Small Reduction Stepper Motor - 5VDC 32-Step 1 16 Gearing

Odseven Little Reduction Stepper Motor – 5VDC 32-Phase one/16 Gearing Wholesale
This is a great very first stepper motor, great for little tasks and experimenting with steppers. This uni-polar motor has a constructed in mounting plate with two mounting holes. There are only 32 phase (eleven.25 degree) for every revolution, and inside of is a one/16 reduction gear set. (In fact its 1/16.032 but for most needs 1/sixteen is a excellent ample approximation) What this implies is that there are genuinely 32*16.032 steps for every revolution = 513 actions! The shaft is flattened so its straightforward to connect stuff to it with a established-screw. A best 1st stepper motor and performs properly with the Motor Protect for Arduino.

The gearing has a few facet outcomes which are crucial to be aware. Very first, you can switch the stepper by hand but not as smoothly as an un-geared stepper. It also implies you shouldn’t use interleaved or micro-stepping to management or it will take permanently to change. Instead use one or double stepping. The torque is relatively substantial but its slower than un-geared steppers – we maxed out at about 50 RPM by above-driving it a bit with 9VDC. At 5V consider to adhere to beneath twenty five RPM

To use with the Adafruit Motor Protect, hook up purple to ground (middle), orange and pink to one motor port (say M1) and blue and yellow to the other motor port (say M2). So in purchase, thats: orange – pink – red – blue – yellow. Then just use the illustration code that arrives with the Adafruit Motor Defend library and set the constructor to Adafruit_StepperMotor *myMotor = AFMS.getStepper(513,motornum) and the speed at 5 RPM by contacting motor->setSpeed(5). Otherwise, you can also wire it up with some transistors and use the Arduino Stepper library

Technological Particulars
Unipolar stepper with .one” spaced five-pin cable connector
513 actions per revolution
one/sixteen.032 geared down reduction
5V DC recommended operation
Bodyweight: 37 g.
Dimensions: 28mm diameter, 20mm tall not including 9mm shaft with 5mm diameter
nine” / 23 cm long cable
Holding Torque: 150 gram-force*cm, 15 N*mm/ 2 oz-power*in
Shaft: 5mm diameter flattened
Approx forty two ohm DC impedence for every winding


Packing &Shipping:

CZPTize branded packaging can be supplied,risk-free packing or any other asked for package deal.
Shipping: We will do the ageing screening prior to deliver out the merchandise. Use large high quality deal to make certain it can provide perfectly.

Business Introduction:

HangCZPT Xuan Yao Electronic CO., Ltd is a manufacturer engaged in all Raspberry Pi related things for much more than eight many years, Our purpose was create the ideal place for understanding electronics and provide the greatest designed goods for customers.For all these several years, we acquired enough knowledge for these. We have already open up some mould in accordance to the special ask for of Raspberry Pi users. We have produced a lot of our own merchandise. For case in point: Raspberry Pi Zero Digital camera, FishEye Digicam, Raspberry Pi seven inch Monitor, Raspberry Pi Case, Zero Kits, Zero Pin CZPTer…..

Q1. Do you supply samples? is it free of charge or additional?
A1: Of course.we could offer samples with free of charge demand,However, customer ought to liable for transport freight.

Q2: How to commence an get?
A2: First of all, allow us know your requirements or application. Next, we quote in accordance to your requirements or our ideas.Thirdly, client confirms the samples and spend deposit for the formal purchase. Last but not least, we organize the manufacturing and ship after it’s completely ready.

Q3: Do you offer you OEM support?
A3: Sure, Positive! Rich expertise on printing brand on solution and OEM deal.

Q4: How numerous days I can get the items right after payment?
A4: Usually, products will be shipped in three days. By DHL will take about three~5 times. So whole will take about 4~8 times to arrive at your palms.

Q5: Could I get your Photos about the merchandise CZPT the watermark to my site?
A5: Of course, we could do this for you.

Q6: What is your terms of payment ?
A6: For small quantity orders, a hundred% greater paid out by PayPal or T/T in advance. For big volume orders like more than ten thousand USD, 30% T/T in advance , stability completely paid before cargo.

Q7: How do you guarantee my goods proper?
A7: Get will be arranged specifically as asked for, Also we will just take you photographs if necessary before providing out.

Our Services:
one. CZPT preparations and packaging are CZPT.
two. Free of charge samples can be offered for screening.
three. 1 12 months warranty.
4. We have our own factory in ZheJiang HangCZPT,we can boost you excellent top quality and aggressive value.
five. We insist on that your fulfillment is initial, we are keeping on higher Efficiency and Instantaneous Response.

Important phrase: Raspberry Pi 4  /  Raspberry Pi Zero Digicam, Fish Eye Digital camera, Raspberry Pi 7inch Monitor, 3.5inch displayRaspberry Pi Situation, Zero Kits, Zero Pin CZPTer and do the custom made OEM starter kits like LED kits, Resistor kits, Robotic kits, Wire spool kits, Raspberry Pi CZPTter kits and so on.


Small Reduction Stepper Motor - 5VDC 32-Step 1 16 Gearing